You Need More Than a Power Strip to Protect Your Company’s Equipment

May 12, 2017

contact us


REQUEST AN ASSESSMENT



What would happen if you were in the middle of typing a report or performing some task, and the office suddenly lost power? Too many would find themselves staring blankly at an equally blank screen as their infrastructure suddenly ceased operations. However, there is a device that can help save you from the worst effects of sudden power loss.

Simply put, there should not be any device that is used for business purposes that is not connected to an Uninterrupted Power Supply (UPS) with a battery backup failsafe. In this case, any device really means any device–your servers should have this preventative measure put in place around them as well. Their purpose is two-fold.

First, a UPS is intended to protect your devices against the sudden surges and dips that an electrical system can experience for any number of reasons. These fluctuations in power can gradually damage a device, especially the more sensitive, high-end ones like servers or specialized desktops. Naturally, it only makes things worse if the device in question is to suddenly lose power completely–not to mention the fact that anything you had accomplished since you had last saved is almost certainly lost.

A UPS helps to prevent these issues in the event that your office ever has a surge or dip in its power supply, or totally loses power without warning.

The first task of a Uninterrupted Power Supply is fairly self-evident: it is intended to supply your devices with an uninterrupted source of power. To do so, the UPS will regulate how much power continues into the attached device, preventing the damaging effects of sudden power fluctuations. Its second function is to serve as a backup power source in the case that power is no longer being supplied from its usual source.

This energy reserve is what makes the UPS a company’s saving grace in a sudden power loss incident. Rather than the entire business suddenly and unexpectedly shutting down, the UPS allows the most critical pieces of IT infrastructure to be shut down safely, and all progress up to that point saved.

A UPS can be used to keep any of your technologies up and running for a time after power has been lost, mostly so that you can prevent your solutions from suffering much damage. This is especially important to have protecting your servers, which usually need a little longer than other devices to shut down safely, without putting the data stored on them (which is all of it) at risk.

Sudden power loss is a potentially disaster-level event that can influence any business, regardless of where they are. As such, you need to be sure that you have the means in place to mitigate the damage before your office goes dark. Remember, you will need to be sure that you have the right UPS devices to protect and provide for the different components of your infrastructure. A desktop with multiple monitors will have different requirements than a server will, so you need to be sure that you have what you will need to properly power down your business before you risk losing important data.

CTN Solutions can help. Give us a call at (610) 828- 5500 to discuss your UPS needs.

CONTACT US


Contact Us

11 + 15 =

CTN Solutions

Address: 610 Sentry Pkwy, Blue Bell, PA 19422

Phone: (610) 828-5500

 

Skip to content